简介:
Retromulator v2.1.7 VST3，AU，独立，WiN.OSX.LiNUX x64 [免费]
WiN/OSX/LiNUX | 免费 | 177.63 MB/303.07 MB/160.29 MB
复古模拟器
是一个独立的应用程序和DAW插件 (AAX / VST3/AU)，通过在周期精确的CPU和DSP仿真器上运行其原始固件来模拟经典的硬件合成器，采样器和键盘。
Akai S1000采样器
通过SFZero MIT许可的具有8点sinc插值的引擎加载SF2、SFZ、ZBP和ZBB样本库以及Akai ISO/BIN/CUE disk图像，扩展的SFZ/SF2操作码支持、自动切片鼓映射、CC20全局调谐和discoDSP Bliss采样器格式。
Nord Lead 1
(Nordic) 是1995年Nord Lead 1 DSP程序的clean-room C重新实现，与原始位精确，并针对实际单元进行了检查，因此不需要ROM。它有48个声音，unison，morph，arpeggiator和所有四个插槽a-d，每个都在自己的MIDI通道上，在机架下方有自己的编辑器。Nord Lead 2的程序可以导入和导出。Nordic插件托管于ROM/Nordic.vst3目录下，且仅随商业版构建一同发布。
科摩多尔64
SID使用reSID引擎模拟MOS 6581/8580芯片，该引擎具有3语音复音，最古老的语音窃取以及完整的50Hz宏播放引擎 (wavetable，pulsetable，filtertable，速度表)。它加载GoatTracker。一些银行和。ins独立乐器，通过CC 1 (颤音深度) 、CC 22 (弯音范围，1-48个半音) 、CC 64 (延音踏板) 进行实时MIDI控制，cc71 (谐振) 、cc74 (截止) 和cc75 (脉冲宽度)。
AY-3-8910 / YM2149
使用Ayumi引擎模拟ZX Spectrum、Amstrad CPC、MSX和Atari ST中使用的3通道PSG，语音层重新实现Ym2149Synth固件: 软音量和音高包络，滑行，颤音，失谐，噪声延迟和转置。通过cc1-11控制语音，并将补丁存储在用户库中。
汉蒙德B3
(OpenB3) 是通过OpenB3的setBfree tonewheel风琴和Leslie引擎，具有上，下和踏板拉杆，打击乐器，颤音和合唱，超速档，三个带有卷积柜体的Leslie柜体，一个板混响，键盘分裂和。fxp预设在工厂和用户银行。
Minimoog模型D
(CA-72) 是Idle Foundry的CA-72电路模型: 1972年model D的每个板都转录为SPICE网表，并从这些模拟中得出实时模型。它以LO，HI和ULTRA质量的主机采样率运行，具有用于离线渲染的4倍引擎，并在插件栏下方打开自己的前面板。预设为。Factory音色库和User音色库中的fxp文件，带有 .fxb银行导入和导出，每个面板控制是一个MIDI CC主机参数。
奥伯海姆矩阵-1000
在仿真的6809板上运行原始固件 (82C54计时器，6850 UART，S & H DAC，锁存器)，通过BLEP振荡器和2x过采样驱动六个CEM3396语音模型。固件在首次启动时会自动对音色进行校准，并将校准结果保存为快照，从而实现后续启动的即时响应。ROM存储体2到9从补丁EPROM转储到。带有出厂名称的SYX文件。每个补丁参数都暴露给主机并映射到MIDI CC，并且两个lfo都可以遵循主机节奏，MIDI时钟或SysEx节奏。
罗兰SC-88
模拟
SC-88、SC-88VL、SC-88Pro、SC-8850和SC-55mkII
GS声音模块，在带有Roland音调发生器，效果和滤波器芯片的H8/500或SH-2内核上运行每个板自己的固件。从板ROM中读取音调和鼓套件名称，并将GS参数映射暴露给主机: 每个部分程序，变化库 (CC0)，音调映射 (CC32) 和节奏部分的任务。一个标准的MIDI文件，或他们的播放列表，可以通过董事会和离线渲染到WAV或MP3 320，从插件或从命令行。
跟踪器核心
通过Fasttracker 2重放器播放XM和MOD模块，并通过带有用于Adlib仪器的OPL3的分裂跟踪器播放器播放S3M和IT。该模块拥有由MIDI音符驱动的传输: 播放，停止和逐步播放列表，可以在其末尾进行混洗或停止。一首歌在沉默五秒钟后结束。文件夹和.m3u播放列表被扩展，歌曲节奏可以跟随主机，并且模块或整个播放列表离线呈现为WAV或MP3 320，具有512抽头正弦插值。
沃利泽200A
(OpenWurli) 是Wurlitzer 200A电钢琴的物理模型，具有64声复音，颤音，扬声器角色建模，速度曲线和2x过采样。
雅马哈OPL3
使用Nuked OPL3引擎模拟YMF262 FM合成芯片 (18通道，4运算符)。它通过文件夹层次结构，音调弯曲和语音窃取加载具有银行导航的SBI补丁文件。
独立的应用程序打开模块，.m3u播放列表和.操作系统移交的mid文件 (双击，打开方式或在dock图标上放置) 并切换到匹配的核心。
该插件有一个MIDI输出，可以传递模拟核心发送的内容 (SysEx转储，参数更改)，在settings.xml中使用midiOutCoreOutput = “1” 打开。
核心也可以在没有声音引擎的情况下运行，作为真实合成器的编辑器，在settings.xml中使用editorOnly_= “1” (名称中的空格变为下划线)。
所有ROM及附加音色库均已包含！
简介:
Retromulator v2.1.7 VST3, AU, STANDALONE, WiN.OSX.LiNUX x64 [FREE]
WiN/OSX/LiNUX | FREE | 177.63 MB/303.07 MB/160.29 MB
Retromulator
is a standalone app and DAW plugin (AAX / VST3 / AU) that emulates classic hardware synthesizers, samplers, and keyboards by running their original firmware on cycle-accurate CPU and DSP emulators.
Akai S1000 sampler
loads SF2, SFZ, ZBP, and ZBB sample banks, as well as Akai ISO/BIN/CUE disk images, via the SFZero MIT-licensed engine with 8-point sinc interpolation, extended SFZ/SF2 opcode support, auto-slice drum mapping, CC20 global tuning, and discoDSP Bliss sampler format.
Nord Lead 1
(Nordic) is a clean-room C++ reimplementation of the 1995 Nord Lead 1 DSP program, bit exact to the original and checked against a real unit, so it needs no ROM. It has 48 voices, unison, morph, the arpeggiator and all four slots A-D, each on its own MIDI channel, with its own editor below the rack. Nord Lead 2 programs can be imported and exported. Nordic is hosted from ROM/Nordic.vst3 and ships only with commercial builds.
Commodore 64
SID emulates the MOS 6581 / 8580 chip using the reSID engine with 3-voice polyphony, oldest-voice stealing, and a full 50 Hz macro playback engine (wavetable, pulsetable, filtertable, speedtable). It loads GoatTracker .sng banks and .ins standalone instruments, with live MIDI control via CC 1 (vibrato depth), CC 22 (pitch bend range, 1–48 semitones), CC 64 (sustain pedal), CC 71 (resonance), CC 74 (cutoff), and CC 75 (pulse width).
AY-3-8910 / YM2149
emulates the 3-channel PSG used in the ZX Spectrum, Amstrad CPC, MSX, and Atari ST using the Ayumi engine, with a voice layer re-implementing the Ym2149Synth firmware: soft volume and pitch envelopes, glide, vibrato, detune, noise delay, and transpose. Voices are controlled via CC 1–11 and patches are stored in a user bank.
Hammond B3
(OpenB3) is the setBfree tonewheel organ and Leslie engine by way of OpenB3, with upper, lower and pedal drawbars, percussion, vibrato and chorus, overdrive, three Leslie cabinets with convolution cabinet bodies, a plate reverb, a keyboard split and .fxp presets in Factory and User banks.
Minimoog Model D
(CA-72) is the CA-72 circuit model by Idle Foundry: every board of a 1972 Model D transcribed into SPICE netlists, with real-time models derived from those simulations. It runs at the host sample rate in LO, HI and ULTRA quality, with a 4x engine for offline renders, and opens its own front panel below the plugin bar. Presets are .fxp files in Factory and User banks, with .fxb bank import and export, and every panel control is a host parameter with a MIDI CC.
Oberheim Matrix-1000
runs the original firmware on an emulated 6809 board (82C54 timers, 6850 UART, S&H DAC, latches) driving six CEM3396 voice models with BLEP oscillators and 2x oversampling. The firmware calibrates the voices itself at first boot, and the result is kept as a snapshot so later boots are instant. ROM banks 2 to 9 are dumped from the patch EPROM into .syx files with the factory names. Every patch parameter is exposed to the host and mapped to a MIDI CC, and both LFOs can follow the host tempo, MIDI clock or a SysEx tempo.
Roland SC-88
emulates the
SC-88, SC-88VL, SC-88Pro, SC-8850 and SC-55mkII
GS sound modules, running each board’s own firmware on an H8/500 or SH-2 core with the Roland tone generator, effects and filter chips. Tone and drum kit names are read from the board ROM, and the GS parameter map is exposed to the host: per-part programs, variation banks (CC0), tone maps (CC32) and the rhythm part assignment. A standard MIDI file, or a playlist of them, can be played through the board and rendered offline to WAV or MP3 320, from the plugin or from the command line.
Tracker core
plays XM and MOD modules through the Fasttracker 2 replayer, and S3M and IT through the Schism Tracker player with Nuked OPL3 for Adlib instruments. The module owns the transport, driven by MIDI notes: play, stop, and step through a playlist, which can be shuffled or stop at its end. A song ends after five seconds of silence. Folders and .m3u playlists are expanded, the song tempo can follow the host, and a module or a whole playlist renders offline to WAV or MP3 320 with 512 tap sinc interpolation.
Wurlitzer 200A
(OpenWurli) is a physical model of the Wurlitzer 200A electric piano with 64-voice polyphony, tremolo, speaker character modeling, velocity curves, and 2x oversampling.
Yamaha OPL3
emulates the YMF262 FM synthesis chip (18 channels, 4-operator) using the Nuked OPL3 engine. It loads SBI patch files with bank navigation via folder hierarchy, pitch bend, and voice stealing.
The standalone app opens modules, .m3u playlists and .mid files handed over by the OS (double click, Open With, or a drop on the dock icon) and switches to the matching core.
The plugin has a MIDI output that can pass on what the emulated core sends (SysEx dumps, parameter changes), switched on with midiOutCoreOutput=”1″ in settings.xml.
A core can also run without its sound engine, as an editor for the real synth, with editorOnly_=”1″ in settings.xml (spaces in the name become underscores).
All Roms & Bonus Soundbanks Included!
评论0