SnowTec Probe@音频频率响应与失真特性分析（Win+Mac）

简介:
SnowTec探针v1.0.2独立版VST3 AU Windows Mac [免费]
免费 | Windows Mac | 52.7 MB
Plugindoctor的免费替代品。
以听感为标准对插件进行测量，并告知您每次测量的终止点。频率和相位响应，谐波和混叠保持分开，Hammerstein内核，互调，压缩，冲动响应，示波器，CPU负载和七个正确性检查。两条各有六个插槽的链路、一个A−B空载测试，以及随旋钮转动而变化的曲线。
对于任何信号都能绘制出漂亮曲线的分析仪，往往难以令人信赖。Probe的工作方式则相反：它会先自测，并显示每次测量的终止位置。当谐波比这更安静时，您会看到 “低于检测极限”，而不是发明的数字。
九个屏幕
在窗口标题栏中切换，每个都带有其自身的模式，位于字段的角落。
线性
来自自校准扫描的幅值和相位；实测延迟与报告值的对比
谐波
THD和混叠频率，2D扫描，从20Hz的Hammerstein内核1-5
混叠
一个音调频谱；每个产品都被标记为谐波或折叠回声。
IMD
SMPTE信号的电平范围为 −40至6 dBFS，频谱具有边带。
动力学
静态曲线、阈值和斜率；阶跃信号下的起音时间和释放时间
红外线
冲动响应，施罗德曲线，T30或T20的RT60，倍频带
范围
正弦波、方波、锯齿波和三角波的输入与输出，以及传输视图
性能
来自16个2048年样本的块处理时间，中位数和p99
支票
七项正确性检查，每项均附有判定结果和编号。

简介:
SnowTec Probe v1.0.2 STANDALONE VST3 AU WiN MAC [FREE]
FREE | WiN MAC | 52.7 MB
Free alternative to Plugindoctor.
Measures a plug-in the way it sounds, and tells you where each measurement stops. Frequency and phase response, harmonics and aliasing kept apart, Hammerstein kernels, intermodulation, compression, impulse response, an oscilloscope, CPU load and seven correctness checks. Two chains of six slots, an A−B null test, and curves that follow the knob as you turn it.
An analyzer that draws a nice curve for any signal is hard to trust. Probe works the other way round: it measures itself first and shows where each measurement stops. When a harmonic is quieter than that, you see “below detection limit”, not an invented number.
Nine screens
Switched in the window header, each with its own modes in the corner of the field.
LINEAR
Magnitude and phase from a self-calibrated sweep; measured latency against reported
HARMONICS
THD and aliasing over frequency, a 2D sweep, Hammerstein kernels 1–5 from 20 Hz
ALIASING
A tone spectrum; every product is marked as a harmonic or a fold-back
IMD
SMPTE against level from −40 to +6 dBFS and a spectrum with sidebands
DYNAMICS
The static curve, threshold and slope; attack and release from a step
IR
Impulse response, the Schroeder curve, RT60 from T30 or T20, octave bands
SCOPE
Sine, square, saw and triangle in and out, plus the transfer view
PERFORMANCE
Block processing time from 16 to 2048 samples, median and p99
CHECKS
Seven correctness checks, each with a verdict and a number