简介:
Dymai声音程序v1.0.9，包括Keygen (WiN和macOS)-R2R
团队R2R | 2022.11.13 | 31.58 MB/163.96 MB
Proclethya by Dymai Sound是一款具有模拟特性的软件合成器。它是根据模拟的三个基本原则开发的。漂移、噪声和失真。合成器具有双振荡器，FM整形器，模拟滤波器，每个振荡器的unison，子噪声振荡器，双混合模式，强大的谐音器，EQ，FX和更多…
振荡器A有五种波形可供选择 (正弦、锯、方形、三角形和噪声)。可以为方形和三角波形设置Pulsewidth。振荡器A和B都有一个第二倍频振荡器，可以通过按下 “第二” 按钮来激活。倍频振荡器可以失谐，输出可以强制为单声道，从而产生轻微的梳理效果，在创建焊盘时效果很好。“漂移” 旋钮引入了旧老式硬件固有的间距或漂移的变化。每个振荡器最多可控制9个声音，并控制失谐和传播。
振荡器A被路由到其自己的全局调谐和FM整形器模块中。调谐可以设置为八度，半音和微调独立。FM按钮打开fm整形器，FMA设置以干/湿方式设置调制声音量。CRS设置FM振荡器的粗调，而FIN可以被设置用于微调调制。COL设置整形器振荡器声音颜色。
两个振荡器被路由到可以以两种方式操作的MIX模块中。交叉，您可以在振荡器A和B之间变形，并为每个osc使用单独的电平推子混合方法。您可以通过点击“MIX”标签在两种模式之间切换。单击SUB和NOISE标签分别打开或关闭sub和noise振荡器。
LFO调制器-两个调制器，可用于调制FM量，滤波器截止，音调和双极滤波器量 (在第二个调制器上)。您可以设置调制的强度，设置速度和速度同步。
具有标准参数的滤波器部分，如截止，共振，驱动，KeyTrack等，具有多种滤波器模式 (模拟，梯形等)。每个振荡器带有高通和低通滤波器的单独模块，以便于分层。后置过滤器饱和度功能也可用。
FX部分-可用的FX模块是延迟，混响，相位器和合唱。延迟和混响模块有一个特殊的旋钮称为 “鸭”，这取决于所应用的量，鸭子的影响信号，当有输入信号检测，从而允许创造性的效果选项。
简介:
Dymai Sound Proclethya v1.0.9 Incl Keygen (WiN and macOS)-R2R
Team R2R | 2022.11.13 | 31.58 MB/163.96 MB
Proclethya by Dymai Sound is a software synthesizer with analog characteristics. It is developed with three fundamental principles of analog in mind. DRIFT, NOISE and DISTORTION. The synth features dual oscillators with doubling, FM shaper, analog filters, unison per oscillator, SUB & NOISE oscillator, dual mix mode, powerful arpeggiator, EQ, FX and more…
Oscillator A has five waveforms to choose from (Sine, Saw, Square, Triangle and Noise). Pulsewidth can be set for the Square and Triangle waveforms. Both oscillator A and B have a second doubling oscillator which can be activated by pushing the “2nd” button. The doubling oscillator can be detuned and the output can be forced to mono which gives a slight combing effect, a great effect when creating pads. The “Drift” knob introduces variations in pitch or drift which was inherent in old vintage hardware. Unison with up to 9 voices with control for detune and spread is per oscillator.
Oscillator A is routed into its own global tuning and FM shaper module. Tuning can be set for octave, semitone and finetune independently. The FM button turns on the fm shaper, the FMA setting sets the amount of modulated sound in dry/wet manner. CRS sets the coarse of the FM oscillator, while the FIN can be set for finetuning the modulation. COL sets the shaper oscillator sound color.
The two oscillators are routed into the MIX module which can be operated in two ways. CROSSOVER, where you can morph between oscillator A and B, and MIX method with separate level faders for each osc. You can toggle between two modes by clicking on the MIX label. Clicking on the SUB and NOISE label turns the sub and noise oscillator on or off respectively.
LFO Modulator – Two modulators which can be used to modulate FM Amount, Filter Cutoff, Pitch, and bipolar filter amount (on the second modulator). You can set the Intensity of the modulation, set the speed and tempo sync.
Filter Section with standard parameters like Cutoff, Resonance, Drive, KeyTrack etc. with multiple filter modes (analog, ladder, etc.). Separate module with Highpass & Lowpass filters per oscillator for easier layering. Postfilter Saturation is also available.
FX Section – The FX modules available are Delay, Reverb, Phaser and Chorus. The Delay and Reverb modules have a special knob called “Duck” which, depends on the amount applied, ducks the effected signal when there is input signal detected, thus allowing for creative effect options.
评论0