Leit Audio UnClip@自动修复数字硬削波峰值损伤（Win）

简介:
Leit Audio UnClip v1.0.0 VST3 AU WiN MAC LiNUX [免费]
免费 | WiN MAC LiNUX | 11.5 MB
剪辑恢复。
松开夹子修复因硬数字裁剪而损坏的短峰。它检测平顶过载，通过受损区域重建合理的波形，并仅更改其识别为剪切的样本。没有阈值或修复量可设置-将其插入损坏的轨道上，如果需要，创建输出净空，并让它工作。
修复峰值，而不是整个信号。
01.查找低于0 dBFS的裁剪
UnClip会查找硬裁剪的形状，而不是假设损坏位于0 dBFS，因此它仍然可以识别后来被裁剪和调低的峰值。
02。重建曲线
从它们周围的干净样品重建接受的平顶峰。只有被识别为被剪切的样本才被写回到输出。
03。修理后腾出空间
当您在EQ、压缩、饱和或导出之前需要修复峰的余量时，输出将重构信号修整高达24 dB。
如何在录制后修复硬削峰

简介:
Leit Audio UnClip v1.0.0 VST3 AU WiN MAC LiNUX [FREE]
FREE | WiN MAC LiNUX | 11.5 MB
Clipping restoration.
UnClip repairs short peaks damaged by hard digital clipping. It detects flat-topped overloads, reconstructs a plausible waveform through the damaged area, and changes only the samples it identifies as clipped. There is no threshold or repair amount to set — insert it on the damaged track, create output headroom if needed, and let it work.
Repair the peak, not the whole signal.
01. Find clipping below 0 dBFS
UnClip looks for the shape of hard clipping instead of assuming the damage sits at 0 dBFS, so it can still recognize peaks that were clipped and turned down later.
02. Rebuild the curve
Accepted flat-topped peaks are reconstructed from the clean samples around them. Only the samples identified as clipped are written back to the output.
03. Make room after repair
Output trims the reconstructed signal by up to 24 dB when you need headroom for repaired peaks before EQ, compression, saturation, or export.
How to repair hard-clipped peaks after recording